Product Description

Persian Garnet

Garnet is a natural mineral abrasive. Hardness of garnets is 5.6 to 7 mice, the density varies in garnets and essentially depends on their chemical composition. The company has been supplying a variety of green and brown garnets to provide a variety of industrial abrasives.

The garnet is the name of the abrasive sand that is blended into the nozzle of the last section with high pressure water, which results in extra cutting force in the waterjet cutting.

Preparation of garnets suitable for waterjet devices is essential. The quality of garnet has a direct impact on the quality and time of cutting, and with inappropriate spray application, not only the quality of the cut is lost, the cutting time increases up to 1.5 times. Cutting time is also a direct factor in the price of cutting operations. Therefore, proper use of superstructures will directly reduce cutting costs. Also, using garnet with inappropriate aggregate causes damage to the device, causing the nozzles to be quickly removed.

Garnet Application Materials

Garnets are used as jewelry. Garnet ash is used as a very good abrasive and a suitable replacement for silicon in blasting operations. By combining garnet with high pressure water, it can be used for cutting steel and other materials.

Garnet is a natural abrasive that is very hard and durable, very dense with a high specific gravity and multifaceted, all of which make it a very winning abrasive.

Failure to provide due to high cost or unprofitable costs in the Blasting General Operation is now being used in specific industries, such as aircraft industries and sensitive military metals.

Advantages of using garnets for decontamination

  – Having a wide range of aggregation and composition for work and various methods

  – Excellent surface profiles, garnet beads provide a really uniformly-free profile to replace, improve, and provide a good level of adhesion to the coating.

  – Affordable, very effective, low consumption

  – Non-toxic, neutral and natural

  – The crystalline silica content is less than 10%

   – Up to 5 times recyclable

   – Low volume of dust, improved operator sight

    – Easy to clean

   – No response will not interfere with your coverage

   – No porosity, no moisture absorption

The mesh 80 is used for cutting metal and the mesh 90 is used for cutting stone and ceramics and glass.